Can you use natural stone tile (such as slate) to create a broken tile mosaic? - slate mosaic tile
I do not see why not, if it flat on one side, so that you can lower cement. By Bob Vila:
"In front of the cement tiles, you need to prepare the tables for parts of the mosaic. How come? Here you can out aggression. Take a mix of brick, wrapped in a towel, a hammer and them a big success. This is the simplest way to use the nibbler pieces of tiles, you get to parts of the mosaic. need for the mosaics of the border, we are still a few small pieces of tile. For smaller pieces of tile to need the pieces of the size you . break
To consolidate the tables into place, using mortar, which can be bought in any shop. You only need to trowel mortar over 1/8th inch thick. Then use the edge of the trowel mortar to make. Then you simply put your chips into force. For parts of the mosaic using the same procedure. Take advantage of the various parts of tile and insert it as you like. Try to keep the spaces between the tiles to 1:8 cm.
Hope this helps! Good luck.
Sunday, January 10, 2010
Slate Mosaic Tile Can You Use Natural Stone Tile (such As Slate) To Create A Broken Tile Mosaic?
1 comment:
Yes, you can do almost everything, using what as tiles, but there would be no sealer for stone and seal of the Peices before gluing in place and the grout. Depending on where the mosaic is in progress at the end, remains the Peices of color. How they are used to make a mosaic bird bath and you do not, the tiles that the stains, mildew, rust, etc. So, to absorb seal seal. You will find a sealer for stone Lowes or Home Depot or local tiles.
Post a Comment